Currently we only carry 5,200lb axles with a 89" hub face with a straight spindle like # 8327820-EB. We do have the Timbren Axle-Less Trailer Suspension System # ASR5200S04 which is rated for 5,200lbs and has a 4" drop spindle. This will require you to change out your other axles and suspension if you have more than one. You will need a Electric Trailer Brake Kit # AKEBRK-7-SA and 2 Hubs # AKHD-655-6-EZ-K for each axle. view full answer...
I believe you are asking about the weld stops on the Replacement Heavy Duty Landing Gear Master Leg # LC241846.
As shown in the attached diagram, the distance from the top of the upper weld stop to the bottom of the lower one on # LC241846 is 17.5 inches. This means that as long as the frame clamps that are currently welded on your 5th wheel are 17.5 inches apart (inside to inside) then this is the correct replacement. The frame clamps or weld brackets can be cut and re-welded in the proper... view full answer...
The correct replacement front landing gear leg for a Jayco Seismic 310 with Lippert Auto Level System is the Replacement Front Jack for Lippert Ground Control 3.0 Leveling System part # LC362485. view full answer...